Recomienda este artículo a tus amigos:
The Structural Integrity of Recycled Aggregate Concrete Produced With Fillers and Pozzolans - Woodhead Publishing Series in Civil and Structural Engineering Paul O. Awoyera
Pedido desde almacén remoto
Nuestros clientes opinan:
The Structural Integrity of Recycled Aggregate Concrete Produced With Fillers and Pozzolans - Woodhead Publishing Series in Civil and Structural Engineering
Paul O. Awoyera
The Structural Integrity of Recycled Aggregate Concrete Produced with Fillers and Pozzolans presents a review on the use of by-products, fillers and pozzolanic materials in the development of concrete, with an emphasis on structural integrity. The volume is broken down into key sections, including a review of the types of materials that are used as latent hydraulic supplements, fillers and pozzolans for making recycled aggregate concrete, rheology and hydration phenomenon, the mechanical and microscale nature of concrete, and the impact of fillers and pozzolans on the workability of concrete with case studies. Durability and strength development are also discussed.
The final section looks at issues such as performance effect, LCA, environmental impact, sustainability and cost benefit analysis. With detailed case studies throughout, this volume will provide useful information for all stakeholders involved in the built environment, including materials scientists, civil engineers, builders, architects and policymakers.
496 pages, Approx. 300 illustrations (40 in full color); Illustrations, unspecified
| Medios de comunicación | Libros Paperback Book (Libro con tapa blanda y lomo encolado) |
| Publicado | 6 de diciembre de 2021 |
| ISBN13 | 9780128241059 |
| Editores | Elsevier Science Publishing Co Inc |
| Páginas | 496 |
| Dimensiones | 152 × 229 × 25 mm · 657 g |
| Lengua | Inglés |
| Editor | Awoyera, Paul O. (Senior Lecturer, Department of Civil Engineering, Covenant University, Nigeria) |
| Editor | Kirgiz, Mehmet Serkan (Professor, Istanbul University-Cerrahpa?a, Avcilar, Turkey) |
| Editor | Thomas, Carlos (Associate Professor, Materials Science and Engineering Laboratory, Civil Engineering School, University of Cantabria, Spain) |
